![]() For every loop the "Counter" is increased by 1. The following event will loop at 2.5 seconds intervals, one time for each handset. # bits, incl 4-byte (32 bits) TL-4 header The number of bits (found in the rightmost column below) is used as a parameter in the "at+cmgs" command to the radio. When the timer times out, it will trigger Event 21 in the next section.īefore the AT Commands can be entered in the event handler, we need to calculate the number of bits in each of the text messages. The event will trigger a 0.1 sec timer, with a "Counter" value ("Related To Number") 1101, 1201, 1301 or 1401, depending on which input was triggered. ![]() The message must be sent to one handset at a time, with minimum 2 seconds interval between each message. The message should be sent to 12 different handsets, with ISSI numbers 10001 - 10012. The configuration is best described using the example from the drawing at the top of this article.įour inputs on an TKIE-2 should generate the following messages: The line must be terminated with Ctrl+Z (0x1A).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |